Additional Settings And Firmware Upgrade; Maintenance And Cleaning; Disposal - Renkforce renkCast 2 Mode D'emploi

9. Additional settings and firmware upgrade

To access the settings, open the menu using the button in the upper-left corner. Use
"Mirror On/Off" to enable/disable mirroring (from your smartphone or computer) and
select the mode (mirror or extend the screen).
Use the DLNA button to stream multimedia files over Wi-Fi.
Use the "Settings" button to access additional settings and the upgrade function,
which updates the app and renkCast 2 firmware.
You can also change the name of the renkCast 2 (Device Name) and the HDMI screen
resolution (Resolution) or enable/disable power saving mode (Power Saving).

10. Maintenance and cleaning

Servicing or repair must only be carried out by a specialist or specialist workshop.
There are no components in the product that need to be serviced by you. Therefore,
never open it!
A dry, soft and clean cloth is sufficient for cleaning the outside.
Never use any aggressive cleaning agents, alcohol or other chemical solutions that
would damage the casing (discolouration).

11. Disposal

The product does not belong in the household waste!
Dispose of the product according to the applicable statutory provisions at the
end of its service life.
24