Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home CARRERA Manuel Du Propriétaire

3.1
Rotate the Motor Hub to align the Hub Notch area over
each of the Five Screws which is holding the Shipping
Retainer to the Motor Assembly .
One by one unscrew each Screw and discard Screws
and Shipping Retainer (Figure 1) .
3.2
Verify that the Flange Gaskets are preinstalled onto the
end of each of the Flanges (Figure 2) .
A spare Flange Gasket is supplied in the loose parts
bag, if required .
3.3
Mount Flanges to Blades using Four #10-24 x 10mm
Washer Head Blade Screws (Figure 3) .
A spare #10-24 x 10mm Washer Head Blade Screw is
supplied in the loose parts bag, if required .

3. Ceiling Fan Assembly

MOTOR HUB
REMOVE SHIPPING
RETAINER
BY REMOVING
5 SCREWS
Figure 1
Figure 2
BLADE
FLANGE
Figure 3
Please contact 1-800-777-4440 for further assistance
5
BLADE
FLANGE
FLANGE
GASKET
#10-24 x 10mm WASHER
HEAD BLADE SCREW
(4 per blade/flange)
FAN BLADE
luminancebrands.com
U.L. Model No.: CF784-3