ASROCK A780FullDisplayPort Mode D'emploi page 33

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2 . 1 3
2 . 1 3 Driver Installation Guide
2 . 1 3
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
2 . 1 3
2 . 1 3
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 4
2 . 1 4
2 . 1 4 Installing Windows
2 . 1 4
2 . 1 4
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Vista
Vista
Vista
64-bit W ith RAID F
64-bit W
64-bit W
Vista
Vista
64-bit W
64-bit W
TM
TM
TM
TM
TM
If you want to install Windows
Vista
TM
64-bit on a RAID disk composed of 2 or more SATA / SATAII HDDs with RAID
functions, please follow below procedures according to the OS you install.
2.14.1 Installing W
2.14.1 Installing W
2.14.1 Installing Windows
2.14.1 Installing W
2.14.1 Installing W
indows
indows
indows
indows
If you want to install Windows
2 or more SATA / SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII Driver Diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E.
The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID installation
guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
ASRock
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
ith RAID Functions
ith RAID F
ith RAID F
unctions
unctions
unctions
ith RAID F
unctions
®
®
XP, Windows
XP 64-bit, Windows
XP / XP 64-bit With RAID F
XP / XP 64-bit W
XP / XP 64-bit W
XP / XP 64-bit W
XP / XP 64-bit W
®
®
XP or Windows
®
XP 64-bit on a RAID disk composed of
Advanced screen
®
XP / XP 64-bit.)
A780FullDisplayPort
Motherboard
/ / / / /
TM
TM
TM
TM
TM
®
TM
®
Vista
or Windows
ith RAID F
ith RAID F
ith RAID Functions
ith RAID F
unctions
unctions
unctions
unctions
IDE Configuration.
3 3
3 3
3 3
3 3
3 3

Publicité

Table des Matières
loading

Table des Matières