Additional Information; About The Network Connection - Samsung AKG VL Série Manuel

Disabling Wi-Fi
Wi-Fi
Enabling Wi-Fi
Disabling Bluetooth
Bluetooth
Enabling Bluetooth
 Wi-Fi and Bluetooth are enabled in default settings.
 When Wi-Fi and Bluetooth are disabled, turning the product off and on does not enable them.

Additional Information

A

About the Network Connection

❚
• Depending on the wireless router used, some network operations may perform differently.
• For detailed information on networking with a wireless router or modem, refer to the router's or
modem's documentation.
• Select a wireless channel that is not in use. If the selected channel is also used by other
communication devices in close proximity, it may cause wireless interference which interrupts
communications or cause choppy audio.
• The speaker can experience choppy audio and interruptions of its wireless connection due to
wireless interference as the performance of wireless LANs are affected by the environment
and conditions of use including the router's performance, its distance from connected devices,
obstructions, and interference by other mobile devices.
• WEP encryption does not work with WPS (PBC) / WPS (PIN).
In Wi-Fi mode, press the
top side) and the CONNECT
together and hold for 30 seconds or more to disable
Wi-Fi.
Press the Wi-Fi button on the right side of the speaker
while Wi-Fi is disabled and hold for 30 seconds or
more to enable Wi-Fi again.
In Bluetooth mode, press the
the top side) and the
side) together and hold for 30 seconds or more to
disable Bluetooth.
Press the Bluetooth
speaker while Bluetooth is disabled and hold for
30 seconds or more to enable Bluetooth again.
ENG - 30
Play / Pause button (on the
button (in the rear side)
Play / Pause
CONNECT button (in the rear
button on the right side of the
button (on