Télécharger Imprimer la page

Worx WX852L Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

NEW SMART CABLE SPECIFICATION
Operations
Low Voltage Protection
Low Voltage Override Function
Over Voltage Protection
Reverse Polarity
Short-circuit
Reverse Charge Protection
Smart cable connects to car
battery first, then plugs into
the jump starter
Smart cable plugs into the
jump starter
Cable Right Connection
Smart cable disconnects to
the car battery
Jumping time limited
Over-Temperature Protection
12V Multifunction Jump Starter with LED
Lights
Standards
Lithium BV<10V+/-0.3V
Vehicle BV<4.5V
Vehicle BV: 2V - 4.5V
Vehicle BV > 15V
Reverse Polarity Protection
Short-circuit Protection
Reverse Charge Protection
Work normally
In Standby Mode
Work normally
Automatic detection to the
standby mode
Maximum 60s, then shut
down
≥ 60℃, then shut down
LED Indicator
Red LED Blink with Buzzer Shout;0.5s
Push the button in 4s, the Green LED
Solid Lighting.
Red LED Blink with Buzzer Shout;1s
Red LED Blink with Buzzer Shout;0.1s
Red LED Solid Lighting and Buzzer
Shout in Rapidly
Blue LED Blink with Buzzer Shout, 0.5s
Green、RED、BLUE LED Solid
Lighting
Blue LED Blink
Green LED Solid Lighting
Blue LED Blink
After 60s, it will automatic protect. The
Blue LED Blink with Buzzer Shout, 0.5s
RED LED blink with buzzer shouts
twice (0.2s apart), after 1s gap, shouts
twice again (ibid.), and so on
11
EN

Publicité

loading