Torch Assembly; Connecting The Torch To The Propane Gas Supply - L.B. White TORCHMAN 500 171BC Manuel Du Propriétaire

1. Assemble all components as shown.
Use pipe thread compound. Observe
gas flow direction arrow on manual
valve body.
2. Ensure all connections are tightened
securely.
3. Connect to the propane gas supply.
1. Remove the cap from the POL. Insert
POL stem into the valve on the
propane gas supply. Thread the nut
counterclockwise into the propane
supply valve. Tighten the nut securely
with a wrench. See Fig. 2.
2. Slowly open the tank valve. This will
prevent lock-up of the excess flow
valve within POL stem.
3. Check all connections with approved
leak detector. Do not use flame to
check for leaks. A fire or explosion
may result.
4. When storing or transporting the
torch, ensure the POL is protected
from damage and dirt entry.

TORCH ASSEMBLY

Connecting the Torch to the Propane Gas Supply

FIG. 1
GAS HOSE
MANUAL VALVE
FIG. 2
POL NUT
AND STEM
Torch Assembly
See Fig.1)
TO GAS SUPPLY
POL FITTING
9