6.9 Closing the camera
Before closing the camera, re-insert the bottom
orientating the slide according to the type of
installation.
Close the camera, paying attention not to damage
the gasket. Make sure that the sealing ring is
correctly fitted in its position.
Pay attention to the fixing. Tightening
torque: 4Nm.
6.10 How to install the camera
Before closing, ensure you have correctly orientated
the slide inside the camera based on the type of
installation.
Fig. 6
Bracket mounting.
Fig. 7
Fixing with pole mount.
Document 800-23093 Rev. A
Fig. 8
Fixing with corner adapter.
6.10.1 Sunshield mounting
Screw the equipped exagonal spacers on the flanges
of the housing (01). Position the sunshield on the
housing (02) and fix it on the spacers with the
equipped screws (03).
02
01
Fig. 9
03
7