Gobo Replacement - Nicols GP 40 R1 Manuel D'utilisation

GP40/80 STRUCTURE AS BELOW FIGURE SHOWN :
1-lens 2-hand screw 3-projector shell 4-radiator
5-holder 6-power box 7-fans 8-gobo switch
9-power switch 10-input power
DFL-20/40/80 Installation
Choosing the projector install location and position, fix the projector by M4 bolts, adjust the projection angle
accordingly.

Gobo replacement

Please turn off the power supply before changing gobo. Twist the hand screws and silicone pads, then get off
the front cover. As below figure shown.
12-