Error Codes; Checklist - Samsung POWERbot SR20H9050U Série Mode D'emploi

error codes

1
Below error codes
appear on the
display panel
error codes
2
Turn off the
emergency switch
and check the below
instructions and take
appropriate action
foreign matter caught in the power brush.
▶Turn off the emergency switch and remove the foreign matter from the
Power brush.
foreign matter caught in the left Driving wheel.
▶Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
foreign matter caught in the right Driving wheel.
▶Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
▶Turn off the emergency switch and turn it back on.
▶Contact a service center if error code does not disappear.
foreign matter accumulated on the obstacle sensor.
▶Turn off the emergency switch and clean the front and rear sensor
with a soft cloth.
foreign matter accumulated on the cliff sensor.
▶Turn off the emergency switch and clean the cliff sensor with a soft
cloth.
Battery malfunction or wire disconnected.
▶Turn off the emergency switch and turn it back on.
▶Contact a service center if error code does not disappear.
ENGLISH-24
3
Error code will
disappear when
you turn on the
emergency switch

checklist