General Description Of Sensor - Parker SCFT-CAN Série Manuel D'utilisation

2.

General Description of Sensor

The SCFT-CAN sensor is a flow turbine from the SCFT-XXX-C2-05 se-
ries. The SCFT flow turbines provide a total solution for measuring flow
at test stations, machine tools and other applications. The flow meter is
installed within the hydraulic circuit.
Typical applications include production inspections, initial commission-
ing or development testing. Because of its compact design, the flow me-
ter can be installed on-site where space is limited. The flow meter is the
perfect tool for measuring the performance of pumps, motors, valves and
hydrostatic gears. The measured readings can then be transmitted using
the standardized CANopen serial bus protocol.
The SCFT-CAN sensor should only be used for measurements with the
"Parker Service Master Plus" measuring instrument. The sensor features
an LED which can signal the current sensor status.
NOTICE
Be sure to use the SCFT-CAN sensor only in conjunction with
the Parker Service Master Plus measuring instrument. This will
ensure that correct measurements are obtained and that the
sensor is not damaged.
29