Step By Step Use - Patient Mode; Attach The Electrodes; Switch On The Stimulator - Chattanooga Cefar TENS Manuel D'utilisation

1 9 C e F A R t e n s
6 . s t e P B Y s t e P U s e - P A t I e n t M o D e
You must read the contra-indications and safety measures described at the beginning
of this manual (Chapter 3 "Safety Information") prior using your stimulator.
6 . 1 At t ac h t he e le ctr odes
- Connect the electrodes to the cables.
- Attach the electrodes to your body.
- Plug the stimulator cables into the two sockets on the base of the device. The two cables can be
connected simultaneously. The cables colours are different to simplify use and facilitate identification
of the two channels. Make sure to have the line of the connector upwards to insert the connector
into the right direction.
- The kit includes two 2mm pin-connector cables.
6 . 2 sw i tc h o n t h e st im u la tor
Press the "on/off" button.
note: last program configuration will always
be displayed by default.
e n