Manusa Visio Manuel D'instructions page 14

DUSI01EN - v5
User Manual
AUTOMATIC SLIDING
DOOR with VISIO Op.
0 - INDEX
1. MACHINE IDENTIFICATION.
1.1. INTRODUCTION
1.2. TECHNICAL FEATURES.
1.3. COMPATIBILITY.
2. USE: USES INCLUDED AND USES THAT SHOULD BE AVOIDED.
3. OPERATION AND USE.
3.1. LOCATION. PHYSICAL AND ENVIRONMENTAL REQUIREMENTS.
3.2. OPERATING PRINCIPLES.
3.2.1. Commissioning.
3.2.2. Normal stop and emergency stop.
3.3. OPERATING MODES AND PROGRAM SWITCH.
3.4. OPERATING MODE SELECTION.
3.5. HOW TO BLOCK THE PROGRAM SWITCH.
3.6. OPENING FROM THE OUTSIDE WITH A KEY SWITCH
(OPTIONAL)
3.7. EMERGENCY STOP (OPTIONAL)
3.8. DOORS EQUIPPED WITH PANIC BREAK-OUT LEAVES
(OPTIONAL)
4. SAFETY.
4.1. IDENTIFICATION OF RISK AREAS.
4.2. SAFETY MEASURES THAT MUST BE TAKEN BY THE USER.
4.3. RESIDUAL RISKS.
4.4. PROCEDURE IN THE EVENT OF A POWER FAILURE.
5. MAINTENANCE.
5.1. SPARE PARTS.
5.2. MANUAL OPERATION - DOOR CLEANING.
5.3. DOOR DECOMMISSIONING AND DISMANTLING
6. TROUBLESHOOTING
7. ANNEXES.
7.1. EC DECLARATION OF CONFORMITY.
7.2. MAINTENANCE CALENDAR.
14
AUTOMATIC DOOR WITH VISIO OPERATOR - USER MANUAL
TRANSLATED DOCUMENT
Read this instruction manual before use.
In this manual you will find all the necessary
information for the correct use of the product.
Keep this manual in a safe place for later referral.