Ingersoll Rand QX Série Manuel D'utilisation page 4

EN
1. Overview of different Menu screens
Press "UP" key
Number being used
Always Press "UP" key to
go to next screen
Password screen
Current fault
Status screen with shunt
cal, wireless strength and
battery level.
Cycle Count
Target Angle, Low
and High screen
Target Torque Low
and High screen
RUN SCREEN
EN-2
Power up QX Series tool
RUN SCREEN
Press "UP" key to
increment the value
Press "ENTER" to select
the changed values.
After display is unlocked
Press "RIGHT" Key
Save or Ignore changes. If not on
Save screen, use the up or down
key to scroll to the Save screen.
Press "UP" key to scroll
on one by one to get
below editable screens
in seriesscreen.
Press "ENTER" to enter "EDIT" mode
Press "UP" key to go to
next screen
Press "DOWN" key to
decrement the value
Press "ESC" to undo and
keep the old values.
48619852_ed1