Product Overview - AEG FL80 Mode D'emploi

8

Product Overview

1
6
1. Surface lamp
2. Spotlight
3. ON / OFF switch
4. Charge control lamp
5. Charging socket
2
4 3
7 8
6. Magnet holder
7. 12 V vehicle charging
cable
8. 230 V charging unit
Technical Data
230 V Input voltage:
charging unit 230 V AC, 50 Hz
Output voltage:
6 V DC, 300 mA
12 V vehicle Input voltage:
charging cable 12 V DC
Rechargeable 3.7 V, Li-ion, 1300 mAh
battery
Charging time Max. 7 hours
Lighting duration 40 LED approx. 3 h
80 LED approx. 1.5 h
Dimensions approx. 28.5 (16.5) x 22 x 4 cm
Weight 500 g
Protection class IP 20 compliant with
DIN EN 60529
USE
Charging
Before initial use, please charge the rechargeable bat-
tery for the surface lamp fully. Now the surface lamp is
ready for use.
1. Connect the charging cable to the surface lamp
charging socket.
2. Connect the charging unit to the 230 V mains sup-
ply or the vehicle charging cable to a 12 V vehicle
charging socket.
Observe the LED charge control lamp:
In operation "Spotlight function":
▪
Red: The rechargeable battery status is critical.
Charge as soon as possible.
In operation "Surface lamp function":
▪
Red: LED remains lit as a control function so that
the light is not unintentionally left on when
the unit is folded together.
When charging:
▪
Red: Battery is being charged
▪
Green: Battery is completely charged