König SAS-VIEW30 Mode D'emploi page 4

1. Connect the DC plug of the cigarette lighter cable to the DC 12 V input of
the monitor
2. Connect the cigarette lighter plug to the car cigarette lighter connection (or
other power source or vehicle)
3. Set the transmitter switch to a channel (1, 2, 3 or 4) and check which offers
the best reception. On the monitor select the same channel by pushing the
channel button until the monitor shows the picture of the camera
4. Connect the power cable (red/black) to a battery power source
5. Connect the mini plug (2.5 mm) of the camera to the contra plug (2.5 mm)
of the cable of the transmitter
6. Camera mounted on the separate bracket (included)
4
ENGLISH