Get To Know Your Wine Cooler; Before Use - Vestfrost FZ W Série Mode D'emploi

Get to know your wine cooler
Before use
Before operating your new appliance,
please read the following instructions care-
fully as they contain important information
on safety, installation, operation and main-
tenance. Keep the instructions for future
reference.
On receipt, check to ensure that the ap-
pliance has not been damaged during
transport. Transport damage should be
reported to the local distributor before the
wine cooler is put to use.
Lighting
Charcoal filter
Wooden shelf
Sealing strip
Nameplate
Door handle
Kick plate
Control panel
Adjustable feet
Lock
Remove the packaging. Clean the inside of
the cabinet using warm water with a mild
detergent. Rinse with clean water and dry
thoroughly (see cleaning instructions). Use
a soft cloth.
If during transport the appliance has been
laid down, or if it has been stored in cold
surroundings (colder than +5°C), it must be
allowed to stabilise in an upright position for
at least an hour before being switched on.
3
GB
fig.1