Getting Started; Battery Installation - LEXIBOOK DMP63 Série Mode D'emploi

1. Remove the static label from the unit's LCD screen.
2. Insert 1 x AAA battery into the battery compartment observing the
correct polarity (+/- signs).
3. Plug the earphones in the earphone socket.
4. Insert an SD card into the SD card slot or download music files to
the device's flash memory.
The DMP63 Series player operates with 1 x AAA/LR03 1.5V type
battery (not included).
1. Open the battery compartment cover located at the back of the unit.
2. Insert 1 x AAA/LR03 1.5V type battery (not included) into the
battery compartment observing the correct polarity (image B, p.2).
3. Replace the battery cover.
Note: The battery indicator is located on the upper right corner of the
LCD screen:
• : The battery capacity is full.
• : The battery capacity is low. Recharge or replace the battery.
Non-rechargeable batteries are not to be recharged. Rechargeable
batteries are to be removed from the product before being charged.
Rechargeable batteries are only to be charged under adult
supervision. Different types of batteries or new and used batteries
are not to be mixed. Only batteries of the same or equivalent type
as recommended are to be used. Batteries are to be inserted with
the correct polarity. Exhausted batteries are to be removed from the
toy. The supply terminals are not to be short circuited. Do not throw
batteries into a fire. Remove the batteries if you are not going to use
the unit for a long period of time.
WARNING: Mal-function or loss of memory may be caused by
strong frequency interference or electrostatic discharge. Should any
abnormal function occur, reset the unit or remove the batteries and
insert them again.

Getting started

Battery installation

11