Downloading The Images From Card To Computer - Reflecta x11-Scan Mode D'emploi

8. Downloading the images from Card to Computer

EN
Connect the Type-C USB cable to the scanner and your
computer's USB port. Turn on the power of both your
computer and scanner. From the Home Page of the
scanner (preset), select the USB Trident Icon by
/ / Button then OK/( ) Button to activate the
connection. Use it as a mass storage device or card
reader that is connected to your computer to download
the image files.
Connection success Connection fail
If the connection fails:
Please check the loading of the SD Card, make sure that
it is properly loaded in the Card Slot. Reload the SD Card
and try again.
Try to connect the USB terminal to the other port of your
computer, a defect computer USB port may cause
connection fail.
-17-