Daga Flexy-Heat CT-200 Mode D'emploi page 15

F2. Calibrate the device: Contact an authorized technical service in case the
product shows abnormal temperatures.
F3. Activate/deactivate sound: Once inside the settings menu, when "F3" ap-
pears on the screen the device will be ready for you to activate or deactivate
the sound from the device. By pressing the up key (6) or down key (9) the
sound will be activated or deactivated.
F4. Changing modes: Once inside the settings menu, when "F4" appears on
the screen the device will be ready for you to calibrate. By pressing the up
key (6) or down key (9) the device will change between body temperature or
surface/object (SurF).
Changing measurement unit: Press and hold the measurement mode key for
some seconds to change from ºC a ºF and viceversa.
DATOS TÉCNICOS
Range of reading
Precision
Screen resolution
Memories
Operating Conditions
Storage and transport conditions
Power
Auto-power off
Time of reading
This product complies with the European Directive of medical product 93/42/EEC.
Body mode: 32.0ºC – 42.9ºC (89.6ºF –
109.2ºF)
Surface mode: 0.0ºC – 100.0ºC (32.0ºF
– 212.0ºC)
Body mode: ±0.2ºC (±0.4ºF)
Surface mode: ±1ºC (±1.8ºF)
0,1ºC/ºF
32
From 10ºC to 40°C
Humidity less than 80%
From -25ºC to 55°C
Humidity less than 90%
2 AAA batteries (LR03)
30 s
0,5
s
15