General Information - Daga Flexy-Heat CT-200 Mode D'emploi

Check that the low battery indicator does not flash when turning on the pro-
duct to be used. If so, change the batteries.
In order to prevent any risk of danger, do not handle the product.
Only qualified technical personnel from the brand's Official Tech-
nical support service may carry out repairs or procedures on the
device.
Any incorrect use or improper handling of the electric blanket shall render the
warranty null and void. Only an authorized technical support service centre
may carry out repairs on this product.
B&B TRENDS SL accepts no liability for any damage that may be caused to
people, animals or objects owing to failure to observe this warning correctly.

GENERAL INFORMATION:

The CT-200 thermometer is designed to read the body temperature on the
forehead as well as of objects.
First check that the appliance is complete and undamaged. Contact the store
where you purchased the product in the event of any doubt.
With your purchase you have acquired:
• 1 CT-200 Infrared thermometer
• 1 Instruction manual.
Appliance description:
1. Trigger to turn on and take reading
2. Cover for the battery compartment.
3. Reading mode. Surface (objects) or body.
4. Results.
5. Storage position.
6. Up key
7. Lighting key.
8. Reading mode key.
9. Down key
10. Value stored in the memory.
11. Level of charge in the batteries.
12. Units (ºC Celsius, ºF Fahrenheit).
13. Sound signals.
11