Technical Data; Noise/Vibration Information - Flex ACH 24 Mode D'emploi

3 Illustration
1 Tool holder
2 Dust protection cap
3 Unlocking collar
4 Drilling/Impact drilling selector
5 Ventilation slots
6 ON/OFF switch
7 Rotational direction switch
8 Unlocking button
9 Battery
10 Auxiliary handle
11 Depth stop
12 Battery charging unit
13 LED charging condition indicator
14 Battery charging cavity
20 Battery Belt Lead
Accessories illustrated or described are not always
included as standard delivery items.
4

Technical Data

Battery-Powered
Pneumatic Drill Hammer
Article number
Input power
Output power
No-load speed
Speed under load
Load hammer blows
Impact energie
Right/Left rotation
Clamping collar dia.
Tool holder
Drill dia.:
- Steel
- Light metal
- Wood
Hammer drilling in conctrete
Recommended hammer drilling
range
Screw dia.:
- Wood
- Sheet metal
Corner measure
Weight
ACH 24
309.915
360 W
275 W
0-1000 RPM
0-800 RPM
max. 4400/min
max. 2.0 J
•
43 mm
Euro standard
SDS-Plus
max. 10 mm
max. 13 mm
max. 20 mm
max. 20 mm
4-14 mm
max. 6 mm
max. 6.3 mm
33 mm
3.67 kg
Battery
Article number
Type
Rated voltage
Capacity
Number of cells
Operating temperature range
Weight
Battery charging unit
Article number
Input voltage
Output voltage
Charging current/time
Weight
5

Noise/vibration information

Measured values determined according to
EN 50 260.
Sound pressure level:
Sound power level:
Work place emission value:
For operation, noise protection measures are
required.
The acceleration measured is usually less
2
than 12 m/s .
Mounting the Auxiliary Handle
6
and Battery Belt Lead
Mounting the Auxiliary Handle
Only use the machine together with the auxiliary han-
dle 10. Place the auxiliary handle onto the clamping
collar and tighten firmly with the handle piece.
Mounting the Battery Belt Lead 20
By using the battery belt lead, the weight of the rotary
hammer can be reduced by the weight of the battery,
as the battery can be hung from the belt using the
strap 15.
– Remove the battery from the machine.
– Push the connection piece onto the battery until it
notches.
In so doing be sure to observe the coloured mark-
ing. The label 16 and the black side of the battery
plug 17 must match. Do not exert any force!
– Connect to the rotary hammer using the plug.
Be sure to observe the colour marking here, too.
On the underside of the rotary hammer there is also
a label for marking the black side of the plug.
English
11
310.336
NiCd
24 V
2.0 Ah
20
+5 °C ... +45 °C
1.36 kg
310.344
230 V ~
24 V
max. 8 A/
max. 20 min.
approx. 1.1 kg
80 dB (A)
93 dB (A)
83 dB (A).