Using Your Polaroid Cube + Camera; Sd Card - Polaroid CUBE+ Guide De L'utilisateur

Using Your
Polaroid Cube
On
Hold the multifunction button until the LED
turns green and you hear 3 beeps. All set!
Off
Hold multifunction button until the LED
turns off and you hear 1 long beep followed
by 1 short beep.
Charging the Battery
The battery in your Cube
charged. To charge, connect the included
USB cable to the camera and connect the other
12 | EN
+
Camera
™
+
comes partially
end of the cable to a power source such as a
computer or wall outlet. No damage will occur
to the camera or battery if used prior to a full
charge. For more detailed information, see
Battery and Charging.

SD Card

A microSD card must be present for your
+
Polaroid Cube to work. To insert a microSD
card, lift the rear cover and with the metal
contacts facing up, insert the card and gently
push in until you hear a click. To remove a
card, gently tap the card and the SD card will
pop out.
If no microSD card is present, your camera
will beep continuously and the LED will blink
EN | 13