Beissbarth VAS 6430 Notice Originale page 22

en | 22 | VAS 6430 | Product description
1
2
1 Spring sleeve
2 Return spring
4. Fit the spring sleeve with return spring in the dia.
20 hole of the adjustment beam.
3
Fig. 5: Fixing in position with locking bolt
1 Locking bolt
2 Teflon washer
3 Adjustment beam
i
The Teflon washer provided must be positioned
between the underside of the beam and the
mounting clamp.
5. Attach the adjustment beam at the through-hole of
the mounting clamp.
6. Fix in position from above with the locking bolt.
"
Adjustment device 6430/1
Fig. 6: Adjustment device 6430/1
|
1 690 386 012 2013-09-24
1
2
Optional drive support
Fig. 7: Drive support
¶
Attach the drive support to the base frame on the
left and right using the two bolts.
Fig. 8: Drive support fitted
Fig. 9: Drive position
1 Hole for drawbar
2 Drive support extended
Beissbarth GmbH