Pe823 / Pe826; Pe828; Pe829 / Pe829A; Warnings - Oregon Scientific PE823 Mode D'emploi

PE823 / PE826

To change the battery:
1. Gently press down on button with a blunt stylus to
release battery compartment.
2. Insert 1 x CR2032 battery.
3. Gently push back the battery compartment.

PE828

To change the battery:
1. Unscrew to open the back cover.
2. Insert 1 x CR2032 and 1 x 23A 12V battery.
3. Place the cover back and tighten the screw.

PE829 / PE829A

To change the battery:
1. Gently press down on button with a blunt stylus to
release battery compartment.
2. Insert 2 x CR2032 batteries.
3. Gently push back the battery compartment.

WARNINGS

This product is designed to give you years of service if
handled properly. Observe the following guidelines:
• Never immerse the unit in water. This can cause
electrical shock and damage the unit. Clean the unit
with a slightly damp cloth and mild detergent.
• Do not subject the unit to extreme force, shock, or
fluctuations in temperature or humidity.
• Do not tamper with the internal components. Doing
so will terminate the unit's warranty and may cause
damage. The unit contains no user-serviceable parts.
• Do not mix new and old batteries or batteries of
different types.
13