Installing The Adapter - Intermec EasyLAN 100e Mode D'emploi

Parallel port
connector
EasyLAN 100e Ethernet Adapter Connectors
Connectors, LED, and Button Descriptions
Part
10BaseT/100BaseTx
Parallel port connector This single high-speed parallel port connects
LED
Test button

Installing the Adapter

Before you install the Adapter, make sure that you have the
appropriate length Ethernet cable, and make sure that you have
loaded media and ribbon into the printer. For help, see the quick
start guide for your printer.
Connecting to Your Network
This section explains how to physically connect the adapter to
the printer and your network.
4
10BaseT/100BaseTx
Ethernet port
LED
Test
button
Description
Provides a standard Ethernet/Fast Ethernet
interface for network connection.
directly to an Intermec printer a parallel port.
The LED provides information on power-up
diagnostics and network activity.
Use the test button to:
• Print a test label that shows some of the
Adapter settings. The Adapter supports IPL,
FP/DP, and ESim languages.
• Reset the Adapter settings to the factory
default settings.
For more help, see "Printing a Test Label" later
in this guide.