Front Panel - Fender 65 TWIN REVERB Mode D'emploi

Your "new" '65 Twin Reverb
proof of the quality and longevity of Fender
amplifier designs.
musicians have found the versatile Twin Reverb
a perfect match for guitar, bass guitar,
keyboards, vocals, accordion, and the electric
violin among others. Featuring REVERB and
VIBRATO, this two-channel amplifier has been
used on thousands of re c o rdings and
countless live performances since 1954 when
the first version appeared on the music scene.
Your new '65 Twin Reverb is a faithful
reproduction of an original 1965 Twin Reverb
model AB 763. Every effort has been made to
keep the circuitry exactly like the original. For
i m p roved reliability
e ff i c i e n c y, a printed circuit board for the
components is used in place of the original
BRIGHT
NORMAL
VOLUME TREBLE MIDDLE
NORMAL CHANNEL (A-F)
A. INPUTS - Plug-in
instruments.
B. BRIGHT - This switch provides an extra boost
to the high-frequency range.
C. VOLUME - Adjusts the loudness of the
amplifier.
D. TREBLE - Adjusts the high-frequency signal
level.
E. MIDDLE - Adjusts the mid-frequency signal
level.
F. BASS - Adjusts the low-frequency signal level.
NOTES
• {A and G} Both INPUTS "1" provide +6dB gain
more than INPUTS "2."
• {B and H} The BRIGHT tone boost is more
noticeable at lower VOLUME settings.
• {D-F and J-L} If either group of TONE controls
is turned fully counter-clockwise there will be no
sound from that CHANNEL.
• {M-O} REVERB and VIBRATO affect only the
VIBRATO CHANNEL.
• {J} The VIBRATO CHANNEL provides more
TREBLE boost than the NORMAL CHANNEL.
F e n d e r ® `65 Twin Reverb
® amplifier is living
Over the years, many
and manufacturing

Front Panel

BRIGHT
VIBRATO
BASS VOLUME
connections for
phenolic parts panel. The power and output
® t r a n s f o rmers
' 6 5 Tw i n Reverb are built to the original
specifications and although some components
used in this re-issue amplifier are different in
size and shape from the earlier version, the
component values are identical. The speakers
in the '65 Twin Reverb are duplicates of the
original Jensen 12-inch "Specially Designed for
Fender" speakers used for many years during
the 1960s.
It is suggested you read this manual thoroughly
to understand all the features and functions of
the amplifier. The purchase of a Fender
amplifier will provide years of musical
enjoyment and the '65 Twin Reverb helps keep
the Fender legacy going strong.
TREBLE MIDDLE BASS REVERB
VIBRATO CHANNEL (G-O)
G. INPUTS - Plug-in connections for instruments.
H. BRIGHT - This switch provides an extra boost to
the high-frequency range.
I. VOLUME - Adjusts the loudness of the amplifier.
J. TREBLE - Adjusts the high-frequency signal level.
K. MIDDLE - Adjusts the mid-frequency signal level.
L. BASS - Adjusts the low-frequency signal level.
M. REVERB - Adjusts the REVERB effect level. Switch
OFF the REVERB effect by turning this knob fully
counter-clockwise. The FOOTSWITCH can also be
used to switch ON/OFF the REVERB effect.
N SPEED - Adjusts the rate of the VIBRATO effect.
The VIBRATO effect will not function without the
FOOTSWITCH plugged in.
O. INTENSITY - Adjusts the intensity of the VIBRATO
effect. Switch OFF the VIBRATO effect by turning
this knob fully
FOOTSWITCH can also be used to switch ON/OFF
the VIBRATO effect.
P. POWER INDICATOR - Illuminates when the
amplifier is ON and receiving power (unless the
bulb has failed.) Bulb replacement: Unscrew the
red jewel and replace bulb with "type T47" (P/N-
0021642000).
4
®
used in the
SPEED INTENSITY
counter-clockwise.
85-watt
The