Troubleshooting - Geemarc CLA9 Mode D'emploi

TROUBLESHOOTING

The 'On' LED is Red
•
Charge the battery if the battery pack is used or replace with new
batteries if standard AAA batteries are installed.
The CLA9/CLA9T appears not to be working
•
Make sure that the headset is securely plugged in
•
Make sure that the volume is correctly adjusted
•
Make sure that the battery is fully charged or use good batteries
•
Make sure the mode switch is set to MIC if using headset/earpiece or T if
using an induction loop (CLA9T)
The CLA9/CLA9T Is not charging
•
Make sure that the power supply cord is plugged in correctly i.e. into a
working wall socket and into the CLA9/CLA9T Communication Piece
•
Make sure that the battery is inserted correctly and is of the
recommended type
8 8