Siemens Gigaset SE361 WLAN Guide D'installation Rapide page 25

ì
Select your Internet service provider and enter the access data you received from
your Internet service provider in the appropriate fields.
ì
Select the way your Internet connections are to be established:
– Select Always on if the connection is to remain set up when the Gigaset
SE361 WLAN is switched on.
– Select Connect on demand if applications such as a Web browser or an e-
mail program are allowed to connect to the Internet automatically.
– In the Idle time before disconnect field, enter a period of time after which
the Internet connection is to close down automatically if no data is transmit-
ted (default setting: 3 minutes, range: 1 to 99 minutes).
This time setting only applies to the Connect on demand option.
– Select Connect manually if you always want to establish and end the con-
nection to the Internet manually. If you subscribe to a time-based service this
will save you high connection charges. The way in which you establish a con-
nection manually is described on page 25.
ì
Click on Test Settings to check the Internet connection. The device will attempt
to connect to the Internet. Any Internet connection already in existence will be
closed first. Depending on the software release of your device maybe this button
is not available.
ì
Confirm your entry with Next >.
In the next step the basic settings you have made are shown for you to check.
ì
If you want to make changes to the settings, click on < Back.
ì
If you want to confirm the settings, click on Finish to close the Basic Setup Wiz-
ard.
You will then be taken automatically to the start screen for the Security Setup Wiz-
ard. Please refer to the relevant sections of the user guide on the CD that comes with
the device. We strongly recommend carrying out the security settings.
The Gigaset SE361 WLAN is now configured and ready to connect to the Internet.
Opening and closing Internet connections manually
ì
Log in to the Gigaset SE361 WLAN. To do this open your Web browser.
ì
Enter the IP address of the Gigaset SE361 WLAN in the browser's address field:
http://192.168.2.1
ì
Enter your password if necessary and click OK.
ì
Click on Connect or Disconnect.
ì
Close your Web browser.
Quick Start Guide
25