Troubleshooting - Diamatic BDC-3140P 230V/60Hz Manuel D'instructions

BDC-3140P
Problem
The vacuum cleaner does not start
The vacuum cleaner does not vacuum
correctly
The vacuum cleaner suddenly stops
Dust leaks from the vacuum cleaner
Electrostatic current on the vacuum
cleaner
I
GB
F
D
E
C324

Troubleshooting

Cause
Lack of power supply
Clogged filters
Clogged vacuum hose
Circuit breaker activation
The filter is torn
Non existent or inefficient grounding
10
Remedy
Check for power at the socket.
Check the condition of the socket and
the cable.
If necessary, ask for assistance to
be performed by a manufacturer's
technician.
Check the filter cleaning operation or
replace the filters.
Check the compressor functionality
(see the relative manual).
Make sure that the compressed air
nozzles are aligned with the cartridges.
Check the vacuum hose and clean it.
Check the circuit breaker adjustment.
Check the motor electrical input.
Empty the container.
If necessary, ask for assistance to
be performed by a manufacturer's
technician.
Replace with an identical one.
Check all ground connections.
Especially check the connection at the
inlet.
07/2008