Operation Tfw 80S - Tefcold TFW 80S Mode D'emploi

Operation model TFW 80S
Connect the cabinet to a socket and turn on the switch on the control panel (POWER), see fig. 1.9.
When the cabinet is turned on, the display will show the current temperature in the cabinet.
Display set temperature:
Press this key and the display will flash the set temperature.
After 5 seconds the thermostat will return to normal reading.
Set new temperature:
Press this key and the set temperature will increase by 1°C for each pressure.
Press this key and the set temperature will decrease by 1ºC for each pressure.
Indicator lamps:
Control lamp "Run" will turn on when the compressor is running.
Internal light:
In order to reduce energy consumption, this cabinet will automatically switch off the
internal light after 10 minutes.
If you want the internal light to remain on continuously, press and hold this key for 5
seconds until display show 'LP'.
To revert to normal mode, press and hold this key for 5 seconds until display show 'LF'
Press this key to turn on/off the internal light.
Fig. 1.9
15