Anti-Frost Mode - Airelec PARIS DIGITAL Manuel D'utilisation

=English Version=
Note: Your settings remain in memory; the heater is just on standby.
COMFORT TEMPERATURE SETTING:
By using the + and – button, you can increase or decrease the
set temperature by steps of 1° C. You can set your own desired
temperature.
Close the doors of the room and wait several hours until the
temperature stabilizes at the desired value.
If the set temperature does not suit you, increase or decrease the
value by steps of 1° C.
Wait again a few hours to check the comfort temperature value.
Advise: We suggest you a reference temperature of 19° C.
ECONOMY OVERRIDE FACILITY:
For short-term absence (more than 2 hours), this mode helps
you to save energy and heating costs. This economic position
will decrease the room temperature by 3.5° C compared to the
chosen comfort temperature setting. To do this:
Press the MODE button until the display shows you the position
« EC » (see picture).
It is possible to check the Economic setting by briefly pressing one of the two buttons + or - .
To change the « EC » temperature, press for 3 seconds on MODE and « EC » flashes. The
modification is possible using the + or – buttons.
Press the MODE button to validate.

ANTI-FROST MODE:

For long-term absence (more than 24 hours), this mode helps to
maintain the room temperature at about 7° C. This ensures
maximum savings without taking the risk of irreversible freezing
damages. To do this:
Press the MODE button until the display shows the position HG
(Hors-Gel i.e. Anti-Frost in French).
HOW TO LOCK THE CONTROL BOX:
You have chose, for example, the Economy mode, press the +
and – buttons simultaneously for approximately 3 seconds. The
flashing of the display indicates that the keypad is locked up.
If you press any button on the keyboard, the display announces,
by the symbol "FF", the impossibility to proceed for any orders.
To remove the keypad lock, operate as above.
14