Pipe Connection - Ecolab MFV III-IV Manuel D'utilisation

Mounting, installation
6.2.2

Pipe connection

A surge damper must be installed for avoidance of pressure surges if the
metering line is installed in the form of a rigid pipe.
Fig. 5: Pipe connection
1. Cut the pipe (Item 1) off straight and deburr.
2. Slip the union nut (Item 2) over the pipe.
3. Weld or adhesively bond (PVC) the pipe to the insertion element (Item 3).
4. Position the O-ring seal (Item 4) in the groove of the connections.
5. Slip the union nut (Item 2) over the insertion element and tighten it.
417101434 Rev. 5-05.2019 26