Checking The Residual Battery Capacity; Residual Battery Capacity Indicator Display And Estimate Of Residual Battery Capacity For Display Unit - Yamaha Batavus Guide D'utilisation

8. Checking the residual battery capacity

You can check the estimate of how much capacity is left in the battery and to what extent it is charged. The
check can be performed using either the display unit's residual battery capacity indicator or the battery's
residual battery capacity indicator lamps.
TIP
• Even if the battery's capacity reaches 0 (zero), you can still ride the bicycle as a regular bicycle.
• If you are using an old battery pack, the residual battery capacity indicator may suddenly display very lit-
tle power when you start moving. This is not a malfunction. Once riding stabilizes and the load is redu-
ced, the proper value is displayed.
8.1 Residual battery capacity indicator display and estimate of residual battery capacity
for display unit
The residual battery capacity can be displayed as a numeral value on the LCD display by using the function
select switch on the display unit to select this option.
Display of the residual
battery capacity on the
LCD display
Slow flashing
<every 0.5 seconds>
Fast flashing
<every 0.2 seconds>
62
Display of the residual
battery capacity
100 - 11%
10 - 1%
0%
Applicable situation
When you turn on the power of the LCD display and
ride continually after the battery is fully charged,
the segments for the residual battery capacity
indicator go out one by one each time the residual
battery capacity is reduced by 10%.
There is very little residual battery capacity left.
Please charge the battery soon.
There is no more residual battery capacity. Turn off
the power, and charge the battery pack soon.
Assist is stopped, but you can still ride the bicycle
as a regular bicycle. You can still use the light for
about another 2 hours.