Adjusting The Stand Height; Adjusting The Angle - LG 38CK950N Guide De Configuration Rapide

Adjusting the Stand Height

1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
Max. 100 mm (3.9 inches)
WARNING
• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

Adjusting the Angle

The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
experience.
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
WARNING
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor' s frame as
illustrated below.
• Be careful not to touch or press the screen area when adjusting the angle of the monitor.
12
Using the Kensington Lock
The connector for the Kensington security system is located at the bottom of the monitor.
For more information on installation and usage, refer to the Kensington lock owner' s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.