To Remove Child's Seat - Bebecar EasyMaxi Instructions

GBR
READ THESE INSTRUCTIONS READ THESE INSTRUCTIONS
CAREFULLY BEFORE USE AND CAREFULLY BEFORE USE AND
KEEP THEM FOR FUTURE REFERENCE KEEP THEM FOR FUTURE REFERENCE
Only suitable if the approved vehicles are fitted with 3
point retractor safety-belts, approved to UN/ECE
Regulation No.16 or other equivalent standards.
1 Place Easymaxi Base on car seat as shown.
2 Pass car safety waist belt through the groove of
Easymaxi Base.
Check that the cars belt is not twisted.
Then fasten the belt to car seat main buckle.
Pull on car safety belt to check for security.
3 Place child's seat into the attachment device of
Easymaxi Base.
Lock will automatically engage.
WARNING: Check that the child's seat attachment
devices are correctly engaged before use.
4 Then pass cars shoulder belt through the belt slit at the
back of the child's seat, making sure there is no slack.
5 Place child in child's seat.
WARNING: Always use the restraint system.
Then lower carrying handle of child's seat, against
the car seat. NB: Check child's seat for security.
6

TO REMOVE CHILD'S SEAT:

from the belt slit at the back of the child's seat.
7 Remove child's seat first by putting handle of child's
seat in the carrying position.
Then push in button on back of child's seat and lift
child's seat away from Easymaxi Base.
ENGLISH
Remove shoulder belt