Getting Started - KULT Pro WMF Mode D'emploi

▪ Do not operate the device and/or immediately remove the mains plug if:
⋅ the device or mains cable are damaged
⋅ you suspect a defect after it has fallen or a similar incident.
Send the device to be repaired in these cases.
▪ Do not immerse the drive unit in water.
▪ In the case of misuse, incorrect operation or improper repairs, we accept no liability for any
damage caused. Warranty payments are also excluded in such cases.
▪ Misuse may cause potential injury.
▪ The device is not intended for commercial use.
▪ Always use original WMF parts and accessories. Any use of third-party accessories will invalidate
your guarantee.
▪ When using dry and/or hard ingredients, the mixing container may become scratched or dull-
looking. This has no negative impact on the performance of the mixer, is no cause for concern
regarding food safety and does not indicate a flaw.
Use
The device is suitable for mixing and chopping foods such as fruits, vegetables and nuts as well as for
preparing juices, smoothies and shakes.
After mixing/blending, the 700 ml and 500 ml mixing containers can be used as drinking bottles by
replacing the blade unit with a drinking cap. The small 300 ml container is suitable for milling and
chopping harder ingredients such as coffee beans, nuts and cereals. On Page 16 you will find an
overview table with the recommended applications regarding the combinations of knives and mixing
containers.
The mixer has three auto programmes: making smoothies , crushing ice
hard ingredients . Alternatively, you can manually choose between 6 different speeds by using the "+"
and "-" buttons (9) or use the pulse function.

Getting started

Clean the device before use as described in the chapter entitled "Cleaning and care."
Using the mixing containers (500 ml and 700 ml)
1. Cut the desired ingredients into small pieces and place them in the mixing container (14 or 15).
Please note the MAX mark on the relevant container. Always add at least 100ml of liquid (e.g.
water, juice or milk) to ensure that you get a homogeneous mixture.
Tip: The light ingredients should always sit on the blade unit. As the container is rotated to close it,
we recommend that you add the light ingredients to the container last of all.
2. Now screw in the blade unit (5 or 16) by twisting it clockwise onto the mixing container. Check
that the blade unit is fastened firmly to the mixing container and forms a tight seal.
3. Stand the mixing container on the relevant recesses in the drive unit (6) and turn the container in
a clockwise direction until it locks into place.
Warning: The appliance only works if the mixing container is attached correctly. A safety
shutdown prevents operation without the mixing container.
4. Now plug the appliance into a mains socket.
5. Press the On/Off switch (12) to turn the appliance on.The display lights up and is ready for
selection. Note: If the display does not light up, the container is not placed correctly on the drive
unit.
14
6. Now select the function you want:
7. Switch off the device using the On/Off button. The display goes out.
8. Unplug the appliance from the mains before removing the mixing container from the drive unit by
9. Turn the mixing container upside-down so that the blade unit is pointing upwards.
10. Turn the blade unit in an anticlockwise direction and remove it.
and chopping/grinding
11. You can now pour out your smoothie, juice or shake. Alternatively, you can also use the mixing
Using the 300 ml mixing container
The small mixing container is particularly suitable for dry ingredients. Please refer to the overview on
Page 16 for examples for use and fill quantities.
Fill and close the mixing container as described in the chapter entitled "Using the mixing containers
(500 ml and 700 ml)." Having successfully chopped up your ingredients, remove the mixing container
from the drive unit and unscrew the blade unit.
A lid (18) is supplied for storing the prepared ingredients, if desired.
Using the mixing jug (1200 ml)
1. Remove the lid (2) from the mixing jug and turn it upside-down. Then attach the desired blade unit
2. Turn the jug back around and add the desired ingredients, which you have previously chopped into
3. Place the lid on the jug. Ensure that the lid is attached firmly and the closing cap (1) is inserted
4. Now follow instructions numbers 3-8 in the chapter entitled "Using the mixing containers (500 ml
5. Remove the lid from the jug to pour out your freshly prepared smoothie or shake.
⋅ Auto programmes: You can choose one of the programmes using the Programme button
(7). Smoothies , ice crushers or chopper/grinder . The selected programme appears in the
display with the relevant symbol. To start the programme, press the Start/Stop button (11). The
mixing process can be stopped at any time using the Start/Stop button.
Note: If you think the food that has been mixed is still too coarse, you can repeat the
proramme. However, be aware that the mixer should not be in operation for more than 1
minute at a time. After the mixer has been in operation for a minute you should then pause
for a minute so that it can be run on full power again afterwards.
⋅ Speeds: You can choose the speed you want on a scale from 1 to 6 using the "plus or minus
buttons" (9). To start mixing, press the Start/Stop button. The speed can be adjusted while
the mixer is in motion. The mixing process stops automatically after 1 minute, but it can be
stopped beforehand at any time using the Start/Stop button.
⋅ Pulse: When you press the Pulse button, the motor starts running at the highest speed
possible. This is especially useful for several short pulses one after the other, e.g. for mixing
layers of ingredients, loosening them or for mixing them again before pouring them out.
Note: You can also stop the mixing process anytime by pushing the On/off switch.
turning the container in an anticlockwise direction.
Caution! Never place the blade unit with the blades pointing downwards. This can damage the
blades and scratch surfaces.
container as a bottle. For this you must screw a drinking cap (13) onto the mixing container.
to the base of the jug by turning it in a clockwise direction. We recommend using the cross blade
(5). Check that the blade unit is fastened firmly to the jug and forms a tight seal.
small pieces. Please note the MAX mark. Always add at least 100ml of liquid (e.g. water, juice or
milk) to ensure that you get a homogeneous mixture.
Tip: First fill with the light ingredients and the liquid.
correctly. The filler opening can be used to add extra ingredients to the jug whilst mixing.
Warning! Moving blade may cause splashing!
and 700 ml)."
15