Fox F50-842 Manuel D'instructions page 12

2. Secure the lateral stanchions and the drum support rods
to the rectangular base using the relative screws, nuts
and washers (Fig. 3).
3. Secure the motor/cowling assembly with the stanchions
using the relative screws, nuts and washers (Fig. 4).
4. Align the motor assembly to the drum for holding the
bags. Position the gasket between the parts and fi x in
place with the relative screws, nuts and washers (Fig.
5).
10
F50-842_ISTRUZIONI.indd Sez1:10 F50-842_ISTRUZIONI.indd Sez1:10
Fig. 3
Fig. 4
Fig. 5
17/05/2016 14.53.17 17/05/2016 14.53.17