Power Modes - Eluktronics NB50TL Guide Utilisateur Concis

Power Modes

You can set a Power Mode by clicking the appropriate
icon in the center of the Control Center. Each power mode
will affect the Airplane Mode and PC camera power.
Mode Airplane Mode
Power Saving
Quiet
Performance
Entertainment*
*Clicking the Default button in Entertainment will reset the default
settings for this mode.
12
PC Camera
ON OFF
OFF ON
OFF ON
OFF ON
Power Status
The Power Status icon will show whether you are cur-
rently powered by the battery, or by the AC/DC adapter
plugged in to a working power outlet. The power status
bar will show the current battery charge state.
Brightness
The Brightness icon will show the current screen bright-
ness level. You can use the dial to adjust the screen bright-
ness or the Fn + F8/F9 key combinations.
PC Camera/Touchpad/Left Windows Key
Click these buttons to toggle the PC Camera or Touch-
pad power status, or to turn the Left Windows Key func-
tionality on/off. The button under the icon will appear
highlighted when it is enabled. Note that the power status
of the camera module is also effected by the Power Mode
selected.
Sleep Button
Click either the Hibernate or Sleep button to have the
computer enter the selected power-saving mode (you will
receive a warning before the system switches to the pow-
er-saving mode and will need to click OK to confirm).