Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DIGITAL MOTOR CONTROL
This rotary tool has advanced digital controls with a LCD display. These include speed
indicator, speed memory and battery indicator functions. Please refer to the following
instructions to understand how these functions work.
POWER ON/OFF
WARNING!! Always check to make sure the bit is tightly installed in the collet and
the cutting accessory is NOT touching anything before turning the power on.
1.
To turn on the tool, press the power on/off button for about 1 second and release it.
NOTE
The tool will start and the LCD display will read "1", indicating the tool is running at
first speed setting, and show a
pack.
2.
To turn off the tool, quickly press the power on/off button and release it.
NOTE
The digital display will go blank .
SPEED ADJUSTMENT
The speed of the tool can be adjusted to accommodate varying types of operations. The
tool speed setting is adjustable from 1 to 9.
1.
Press the power on/off button for about 1 second and release it. The tool will start
at its slowest speed and the LCD display will read "1". This indicates the tool is
running at first speed setting.
2.
To increase the speed of the tool, quickly press the
button once. The speed setting of the tool will increase by 1 to 2. The LCD
display will read "2".
3.
Continue to increase the speed of the tool by pressing the
control button several times. The speed of the tool will increase by 1 each time
until it reaches its maximum speed setting of 9.
1English1
symbol, presenting the current capacity of battery
English
-11
side of the speed control
side of the speed
Publicité
Table des Matières
