Use And Servicing; Control Panel - aldes C.Axpir Notice D'installation Et De Maintenance

3. USE AND SERVICING

3.1. Control panel

3.1.1. C.Axpir Digital
®
1 2 3
POWER HEPA
MAX
MIN
RUN DUST
1. Suction power
2. Filter clogging level
3. Electrical protection
This indicator lamp flashes if the thermostat or circuit breaker on the equipment is activated. In this case, switch off the central vacuum
cleaner and unplug it from the power supply. Wait for the thermostat to cool down (ten to fifteen minutes) then press the circuit breaker
button to restart the central suction unit.
4. Number of hours in use
Press MODE to display the use time.
5. Tank filling indicator
When the small black screen is completely dark, this means that the tank must be emptied. This symbol is managed by the pressure
sensor located in the motor box.
6. Maintenance necessary warning
A general motor service is necessary when this indicator lamp is flashing. Contact your installer. You can continue to use the central
vacuum cleaning whilst waiting for the installer's intervention.
MODE
3.1.2. C.Axpir Dynamic
®
1
POWER HEPA
MAX
MIN
4 5
RUN DUST
SERVICE
REST
2
1. LED that indicates that the unit is switched on
2. LED that indicates that the unit is running
6
SERVICE
Increase the power/navigation in the menu
Start/Reduce the power/navigation in the menu
REST Stop/Reset
MODE Menu
18