Weather Forecast; Outdoor Thermo Sensor; Battery Replacement - TFA 35.1060 Mode D'emploi

TFA No. 35.1060 Anleitung 06.11.2006 15:03 Uhr Seite 8
DAYTONA
– Weather station with radio controlled clock
4.4 Thermometer and hygrometer
4.4.1 Display change
• Press CHANNEL button to change between the outdoor transmitters CH1,
2 or 3. Press CHANNEL button for 2 sec. The (
channel is alternately displayed for 5 sec.
4.4.2 Trend pointers
• The trend pointers displayed on the LCD indicate if the trend of tempera-
ture and humidity is increasing, steady or decreasing.
4.4.3 Comfort zone
• There are 3 different indicators for the comfort zone of indoor climate:
COMFORT: Ideal values (20-25°C/68-77°F, 40-70%)
WET: Too wet (> 70%)
DRY: Too dry (< 40%)
4.4.4 Maximum / Minimum function
• Press MEM button to show the minimum (MIN) values of temperature and
humidity of indoor and outdoor transmitters. Press MEM button again to
show the maximum (MAX) values.
• Hold MEM button for 2 seconds to clear the recorded maximum and mini-
mum reading.
4.4.5 Temperature alert function
• Press TEMP ALARM button to enter the Temperature Alarm function.
appears on the LCD.
• Hold TEMP ALARM button for 2 seconds to enter the Alarm setting mode.
Temperature flashes. Press
limit. Press TEMP ALARM button to confirm the settings.
• Press TEMP ALARM twice to get to the lower temperature limit.
on the LCD.
• Temperature flashes. Press
limit. Press TEMP ALARM button to confirm the settings.
• Once the temperature alarm starts to ring,
TEMP ALARM to stop the alarm.
14
) icon appears and each
or button to adjust the upper temperature
or button to adjust the upper temperature
or is flashing. Press
DAYTONA
– Weather station with radio controlled clock

4.5 Weather Forecast

• There are 5 different weather symbols (sunny, slightly cloudy, cloudy, rainy,
snowy) and 3 different symbols for the trend of atmospheric pressure
(increasing, steady, decreasing).
• The weather forecast relates to a range of 12 to 24 hours and indicates
only a general weather trend. The accuracy is about 70 %.

4.6 Outdoor thermo sensor

• By pressing the pick hole on the thermo sensor unit with a pointed object
the temperature unit on the sensor display can be changed from °C to °F.
• Press RESET to re-start in case of problems.
• After successful installation screw up the battery compartment of trans-
mitter carefully.
• For having additional external transmitters (maximum 3), proceed as
described in chapter 3. Select for each sensor a different channel by the
CHANNEL button before inserting batteries.
4.7 Positioning of display unit and transmitter
• Choose a shady and dry position for the transmitter. ( Direct sunshine falsi-
fies the measurement and continuous humidity strains the electronic com-
ponents needlessly)
• Place the Display Unit at the final position. Avoid the vicinity of any inter-
fering field like computer monitors or TV sets and solid metal objects.
• Check the transmission of 433 MHz signal from the transmitter to the Dis-
play Unit (transmission range 60 m free field). Within ferro-concrete rooms
(basements, superstructures), the received signal is naturally weakened.
• If necessary chose another position for transmitter and/or display unit.
• Fix the transmitter by using plastic hanger.

5. Battery Replacement

• When the batteries are used up, low battery icon appears at the indoor or
outdoor temperature row.
appears
• Use alkaline batteries 1.5 V AA only. Observe correct polarity.
Attention:
Please do not dispose of old electronic devices and empty batteries in
household waste. To protect the environment, take them to your retail
store or to appropriate collection sites according to national or local regu-
lations.
15