Victron energy BlueSolar MPPT 75/10 Mode D'emploi page 98

Figure 4: Power connections
4
Figure 5:
The Victron
inverters model Phoenix
12/800, 24/800, 12/1200 and
24/1200 can be controlled by
connecting the right side
connection (1) of the inverter
remote control directly to the
solar charger load output.
Similarly, all Phoenix
VE.Direct inverters can be
controlled by connecting to the
left side connection of the
remote control
Figure 6:
For the Victron
inverters model Phoenix 12/180,
24/180, 12/350, 24/350, the
Phoenix Inverter C models and the
MultiPlus C models an interface
cable (1) is needed: the Inverting
remote on-off cable (article
number ASS030550100)