Parts Description; Heating Up Light; Before The First Use - tomado TM-9025 Mode D'emploi

PARTS DESCRIPTION

1. Temperature control knob
2. Timer (0-30 min.)/power-on knob
3. Power light

4. 4. Heating up light

5. Basket
6. Basket release button
7. Basket handle
8. Pan
9. Air inlet
10. Air outlet openings
11. Mains cord
3
9
10
11
10
4
2
1
5
6
8
7
Instruction manual

BEFORE THE FIRST USE

• Remove all packaging material.
• Remove any stickers or labels from the appliance.
• Thoroughly clean the basket and the pan with hot water,
some washing-up liquid and a non-abrasive sponge.
• Wipe the inside and outside of the appliance with a
moist cloth.
• Place the appliance on a stable, horizontal and level
surface, do not place the appliance on non-heat-
resistant surfaces.
• Place the basket in the pan properly
• This is an air fryer that works on hot air. Do not fill the
pan with oil or frying fat.
• In order to prevent disruptions of the airflow do not
put anything on top of the appliance and make sure
there is always 10 centimeter of free space around
the appliance.
USE
• Put the mains plug in an earthed wall socket.
• Carefully pull the pan out of the air fryer.
• Put the ingredients in the basket.
• Slide the pan back into the air fryer.
• Never use the pan without the basket in it.
• Do not touch the pan during and some time
after use, as it gets very hot. Only hold the pan
by the handle.
• Turn the temperature control knob to the required
temperature.
• Determine the required preparation time for the
ingredient.
TM-9025