ADEO SCREEN INSUPERIOR PRININ-SUP-XXXXX Manuel D'installation page 11

ENGLISH – Motorized screen user manual
PROGRAMMING END STOPS MOTOR PROGRAMMING END STOPS PROGRAMMING END STOPS PROGRAMMING END STOPS MOTOR SOMFY RTS MOTOR MOTOR
Move the
screen surface
to down limit
switch.
Move the
screen surface
to up limit
switch.
As is the case for installation procedures, when the product reaches the end of its useful life, disposal operations must be carried out by qualified personnel.
The product is made up of various types of material: some can be recycled, others have to be disposed of. You must follow applicable recycling or disposal regulations in
force in your area for this product category.
As shown in the picture on the left, you must not throw the product into a domestic litter bin. Either dispose of the various components separately, pursuant to the
regulations applicable in your territory, or hand the product over to a vendor upon purchasing a similar new product.
Warning: local regulations can foresee heavy fines in case of unlawful disposal of this product.
1. 1. 1. 1.GUARANTEE LIMITATIONS GUARANTEE LIMITATIONS GUARANTEE LIMITATIONS The Manufacturer guarantees that all the products it distributes are free of production-, material- and processing-related defects, without prejudice to the following terms and GUARANTEE LIMITATIONS
conditions:
* The product is guaranteed for a period of twenty-four (24) months
* Mechanical parts are guaranteed for a period of thirty-six (36) months
* The motors and remote controls (excluding batteries) are guaranteed for a period of thirty-six (36) months
as from the date of the purchase invoice/receipt released to the end user
2. 2. 2. 2.CONDITIONS AND LIMITATIONS CONDITIONS AND LIMITATIONS CONDITIONS AND LIMITATIONS This guarantee is subject to the following conditions and limitations: CONDITIONS AND LIMITATIONS
the guarantee shall be deemed null and void if: the product has been used or manipulated in any manner other than those indicated in the user manual's instructions; or damaged as a result of improper use,
or owing to accident or negligence during transport; or if the product's defect is the result of repair or manhandling on the part of anyone other than personnel authorized by our Customer Care office.
The product must be installed by trained and experienced insider professionals, following the instructions provided for the installation and maintenance procedures.
3.DIMENSIONAL TOLERANCE Projection Fabric +/-20mm, Structure and components up to 2500mm +/-2mm - up to 6120mm +/-5mm. 3.DIMENSIONAL TOLERANCE 3.DIMENSIONAL TOLERANCE 3.DIMENSIONAL TOLERANCE
4 4 4 4 . . . . RE RE RE RETURNS TURNS TURNS TURNS No product shall be returned and accepted without an authorization (RMA) released by Customer Care.
Products must be returned in their original (or equivalent) packaging to avoid being damaged during transport. Any transport damages resulting from inappropriate packaging shall not be covered by this
guarantee.
The returned product shall be accompanied by a detailed description of the defect and by a photocopy of the original purchase invoice/receipt.
The purchase invoice/receipt shall clearly indicate the following: Model – Serial number – Purchase date – Name and address of the purchaser and authorized dealer.
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Doc: INSUPERIOR Installation Manual rev3 | 30.01.2015
Please verify that you are working with the latest revision of this document before specifying your screen.
SOMFY RTS 230V 50Hz/120V 60Hz SOMFY RTS SOMFY RTS 230V 50Hz/120V 60Hz ( ( ( ( procedures already carried out in factory 230V 50Hz/120V 60Hz 230V 50Hz/120V 60Hz
1 Press both
and
same time until you will see
a brief up and down motion
of screen surface.
1. Press both
and
same time until you will see
a brief up and down motion
of screen surface.
procedures already carried out in factory, , , , SHOULD NOT be performed by unauthorised personnel procedures already carried out in factory procedures already carried out in factory
Down limit swi Down limit swi Down limit swit t t t ch ch ch ch Down limit swi
2
Move the screen with
at the
to reach the desired
down limit position.
Up limit swicht Up limit swicht
Up limit swicht Up limit swicht
2
Move the screen with
at the
to reach the desired up
limit position.
PRODUCT'S DISPOSAL PRODUCT'S DISPOSAL PRODUCT'S DISPOSAL PRODUCT'S DISPOSAL
GUARANTEE GUARANTEE GUARANTEE GUARANTEE
SHOULD NOT be performed by unauthorised personnel) ) ) ) SHOULD NOT be performed by unauthorised personnel SHOULD NOT be performed by unauthorised personnel
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
Page 11