Key To Symbols Symbols - Husqvarna 324R X Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symbols
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and
understand the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Wear a protective helmet where
there is a risk of falling objects
Approved hearing protection
Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters (50 ft.).
Machines fitted with saw blades or
grass blades can be thrown violently
to the side when the blade comes
into contact with a fixed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at least 15 meters (50
ft.) from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
KEY TO SYMBOLS
Only use non-metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer cord.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
The engine exhaust from this product
contains chemicals known to the State
defects or other reproductive harm.
of California to cause cancer, birth
English
35

Publicité

Chapitres

Table des Matières
loading

Table des Matières