Walk-Up Operation; Available Options - Oki MC360MFP Guide De Référence Pratique

Walk-Up Operation

Available Options

• Copy
• Scan to E-mail
• Scan to USB Memory
• Scan to Network
• Scan to PC
• Fax
Access Control Feature
Normally, you will see the following
on the unit's display panel:
The Access Control feature is used
to restrict walk-up access to the
unit. When this feature is engaged
by your system administrator, you
must enter a PIN before using the
unit.
If your administrator has enabled
Access Control, you will see
on the display panel. Use the
operator panel's number keys (1)
to enter your assigned PIN, then
press the Enter key (2).
Note
If you make a mistake when
entering your PIN, use the Left
Arrow key (3) to delete
individual digits by backspacing.
If you have any questions, check
with your system administrator.
4
English
•