General Rules; Range Of Application; Accident Prevention - Kränzle K 1050 TST Manuel D'utilisation

Description of high pressure cleaner
This is what you have purchased
36
1. Kränzle high pressure cleaner
K 1050 TST
2. safety trigger gun with insulated
handle and plug coupling
3. filth killer lance with stainless
steel pipe and plugin nipple
4. flat jet nozzle with stainless
steel pipe and plugin nipple
5. Crank handle with two fastening
screws for the power supply
cable
6. operating manual
spare parts list
7. Water inlet sieve, plug coupling
with visible filter
8. Crank handle with
fastening screw

General rules

Range of application

Use high pressure cleaner for cleaning purposes only using high pressure jet with
or without cleaning detergent. The high pressure cleaner is designed for use in
private environment only.
Environmental, refuse disposal and water protection regulations
must be observed!
Inspections
The high pressure cleaner must be inspected according to the "Guidelines for
Liquid Spray Devices" at least once every 12 months by a qualified person, to
ensure that continued safe operation is guaranteed. The results of the inspection
are to be recorded in writing. This may be done in any form.
High pressure cleaners used for commercial purposes have to be
checked by a qualified person at least every 12 months!

Accident prevention

The high pressure cleaner is designed for accidents to be impossible if used
correctly. The user is to be notified of the risk of injury from hot machine parts
and the high pressure jet. The "Guidelines for Liquid Spray Devices" must be
complied with.
Oil leakage
If oil leaks contact your nearest after-sales service (dealer) at once.
(environmental damage, damage to the transmission).
GB
37