Safety Instructions - Aerfast AFI0042 Notice Technique

1. Read carefully these instructions to avoid injury for yourself or any other person.
2. Wear authorized safety glasses as well as any other individual protection equipment
adapted to the work to be done.
3. Use only compressed air as an energy source. Any other gas (or liquid) is prohibited!
4. Use clean, dry, lubricated compressed air, adjusted to the recommended pressure.
5. The max pressure delivered by the compressed air source must not exceed the max
authorized pressure by 10%.
6. The supply hoses must resist 150% of the max pressure deliverable by the compressed
air source.
7. The machine must be connected to the compressed air source using a quick acting
coupler which, once disconnected, release all pressure inside the machine.
8. Before any intervention on the machine, disconnect any energy supply.
9. Never load staples when pulling the trigger.
10. Only use original staples and spare parts or those recommended by the manufacturer.
Never modify the tool.
AERSEAT (indice AF) – 18/09/2017

SAFETY INSTRUCTIONS

12