Frequently Asked Questions - Philips sonicare HealthyWhite 700 Série Mode D'emploi

ENGLISH
12
Question
Why doesn't the Sonicare work? You may need to recharge the Sonicare. Charge the Sonicare for at
Why do I feel a tickling
sensation when I use the
Sonicare?
The brush head chatters against
my teeth. What can I do about
this?
Why does the Sonicare seem
less powerful?
Why does the Sonicare seem to
change power during brushing?
Do I need a special charger if I
travel with the Sonicare?
Guarantee restrictions
The terms of the international guarantee do not cover the following:
- Brush heads
- Damage caused by misuse, abuse, neglect, alterations or unauthorised
repair.
- Normal wear and tear, including chips, scratches, abrasions,
discolouration or fading.

Frequently asked questions

This chapter lists the questions most frequently asked about the appliance.
If you cannot fi nd the answer to your question, contact the Consumer
Care Center in your country.
Answer
least 24 hours.
The socket may not be live. The electricity supply to sockets in mirror
cabinets over washbasins or shaver sockets in bathrooms may be cut
off when the light is switched off
You may need to reattach or replace the brush head.
You may experience a slight tickling/tingling sensation when you
use the Sonicare for the fi rst time. As you become accustomed to
brushing with the Sonicare, this sensation diminishes.
To avoid this, keep the brush head properly oriented, with the bristles
placed on the gumline at a slight angle.
You may need to charge the Sonicare.
The Easy-start feature may be on. Deactivate the Easy-start feature
(See chapter 'Features').
You may need to replace the brush head.
You may be in the Clean and White brushing mode. If this is the
case, the toothbrush starts in the Clean mode for 2 minutes
and then changes to the White mode for 30 seconds. The Clean and
White mode has a different sound and brush movement.
No, you do not need a special charger. The Sonicare charger can be
used with common worldwide voltages between 100-240V AC, at
either 50 or 60Hz. A simple plug adapter is all that is required.