Connection; Connecting The Variant With Plug-In Power Supply Unit To Power Supply; Connecting The Variant With Mains Plug To Power Supply; Functions Of The Luminaire - Waldmann SNLQ 54/2 Mode D'emploi

Connection

5. Connection
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Compare the mains voltage with
the nominal voltage and the fre-
quency specified on the rating
plate and make sure that they are
identical.
NOTICE
Material damage caused by wrong
handling.
Omission of the ESD protection and
damage to electronic components.
X Luminaires suitable for EPA must
remain plugged in in electrostati-
cally protected areas (EPA).
X Connect the luminaire to an
inspected electric mains that
meets the legal requirements
using the delivered plug-in power
supply only.
5.1 Connecting the variant with
plug-in power supply unit to
power supply
X Connect the connecting cable of the
luminaire to the plug-in power sup-
ply unit.
X Plug the plug-in power supply unit into
a socket.
5.2 Connecting the variant with
mains plug to power supply
X Plug the mains plug into a socket.
6.

Functions of the luminaire

Depending on the luminaire model, the
luminaire has different functions. If you
want to find out which functions the lumi-
naire has, see chapter 2 "Model overview" ,
page 18.
6.1

Operating functions

Switchable
This function can be used to switch the
luminaire on and off.
Light segments
This function can be used to switch the
individual light segments of the luminaire
on and off.
The light segments create a 3D shadow
effect which highlights the structure and
reveals slight defects or fine differences in
the surface structure of an object.
C
Fig. 5: Light segments
Position of
rocker switch
III
II
ENG
A
B
Description
Light segments
A + B + C are lit.
Light segments B +
C are lit.
21